Products
We are suppliers of Bullnosing/Cranking, Cut to length lines, De-coilers, Guillotines, Guillotine blades, Roll Top and IBR Ridging and Slitting Heads.
WE SPECIALIZE IN MANUFACTURING OF ROOF SHEETING MACHINES
Line speed for corrugated IBR and Widespan: 0 - 50 meters per minute.
Corrugted Rollformer
Can profile 8.5 and 10.5 corrugations
Thickness of Material:
* 0.25mm to 0.8mm
* Cover width 8.5 = 610mm, input material 762mm
* Cover width 10.5 = 762mm, input material 925mm
* Corrugated profile can also be cranked and bullnosed.
* Aluminium, Chromodek and Stainless Steel
can be profiled.
Thickness of Material:
* 0.25mm to 0.8mm
* Cover width 8.5 = 610mm, input material 762mm
* Cover width 10.5 = 762mm, input material 925mm
* Corrugated profile can also be cranked and bullnosed.
* Aluminium, Chromodek and Stainless Steel
can be profiled.
Cut to length line
Used for the cutting of flat sheets into required lenghts.
Thickness of material
0.27 - 1mm x 925mm width
0.2 - 3mm x 1225mm width
0.2 - 3mm x 1250mm width
Material to be processed:
Galv coils, Cold and hot rolled
The CTL consist of:
De coiler, Machine, Guillotine and Rolloff table
Thickness of material
0.27 - 1mm x 925mm width
0.2 - 3mm x 1225mm width
0.2 - 3mm x 1250mm width
Material to be processed:
Galv coils, Cold and hot rolled
The CTL consist of:
De coiler, Machine, Guillotine and Rolloff table
Cranking/Bullnosing Rollformer
All four profiles can be cranked
These cranks can be at the end of a sheet of along the length of the sheet or centre crank.
Machine consist of:
* Automatic feeding table
* Counter for sheets and nodges
* Machine include one die set
(forward or reverse with holder)
These cranks can be at the end of a sheet of along the length of the sheet or centre crank.
Machine consist of:
* Automatic feeding table
* Counter for sheets and nodges
* Machine include one die set
(forward or reverse with holder)
Widespan Rollformer
Widespan sheets can be used for cladding on industrial buildings and is an economical alternative to IBR sheets.
Thickness of material:
* 0.25 to 0.8mm
* Cover width 762mm, input 925mm
* Can also be cranked or bullnosed.
Thickness of material:
* 0.25 to 0.8mm
* Cover width 762mm, input 925mm
* Can also be cranked or bullnosed.
IBR Rollformer
IBR profile sheets can be used for commercial and industrial buildings.
Thickness of material:
* 0.25 to 0.8mm
* Cover width 686mm, input 925mm
* Can also be cranked or bullnosed.
The IBR machine consist of:
* Rollformer, De coiler, Guillotine, Rolloff table
and computer
* Aluminium, Chromodek and Stainless Steel
can be profiled.
Thickness of material:
* 0.25 to 0.8mm
* Cover width 686mm, input 925mm
* Can also be cranked or bullnosed.
The IBR machine consist of:
* Rollformer, De coiler, Guillotine, Rolloff table
and computer
* Aluminium, Chromodek and Stainless Steel
can be profiled.
Hand Guillotine
* Corrugated Hand Guillotine.
* IBR Hand Guillotine
* Widespan Hand Guillotine
* Saflok Hand Guillotine
* IBR Hand Guillotine
* Widespan Hand Guillotine
* Saflok Hand Guillotine
RollTop Ridging and IBR Ridging
De-coilers
* 10 Ton - 20 Ton